ATECO Dynamometer Services
| |
| FULL DAY |
- OPERATOR FURNISHED
- 8 HOURS TO INSTALL, RUN ON DYNO, AND REMOVE
- ENGINE INSTALLED AND FLUID LEVELS CHECKED
- ENGINE FIRED AND STABALIZED
- BROKE-IN AND CHECKED FOR LEAKS
- GET OIL TEMP. AND VERIFY OIL PRESS. AND WATER TEMP
- SET IDLE AND VERIFY IDLE VACUUM
- CHANGE OIL, CHECK, AND CLEAN FILTER
- CHECK COMPRESSION, VALVE LASH, AND SPARK PLUGS
- WARM UP ENGINE TO DO PULLS
- DO SOME POWER PULLS TO CHECK RUNNING CONDITIONS
- CHANGE JETS, PLUGS, OR TIMING AS NEEDED
- DO MAX POWER PULLS (OPTION TO USE SHIFT POINTS OR CIRCLE TRACK DIMENSIONS TO SIMULATE ON TRACK)
- GIVEN OPTION TO TRY OTHER CARBS, SPACERS, HEADERS ETC.
- CUSTOMER GETS A SPECIAL FOLDER W/DIGITAL PICTURES OF ENGINE ON DYNO AND THE MOST ACCURATE TEST RESULTS AVAILABLE.
- ACCESSORIES REMOVED AND ENGINE TAKEN OFF DYNO
|
| |
| HALF DAY |
- OPERATOR FURNISHED
- 4 HOURS TO INSTALL, RUN ON DYNO, AND REMOVE
- ENGINE INSTALLED AND FLUID LEVELS CHECKED
- ENGINE FIRED, STABALIZED, AND CHECKED FOR LEAKS
- GET OIL TEMP, VERIFY OIL PRESSURE, AND WATER TEMP
- SET IDLE AND VERIFY VACUUM
- WARM UP ENGINE TO DO PULLS
- DO SOME MAX POWER PULLS (WITH OPTION TO SET DYNO FOR TRACK SIMULATION)
- REMOVE ACCESSORIES AND TAKE ENGINE OFF DYNO
|
| |
| RECOMMENDED ITEMS |
- MAIN CARBURETOR+SPARE
- CARB SPACERS
- FUEL PUMP
- OIL AND FUEL
- SPARK PLUGS AT DIFFERENT HEAT RANGES
- DISTRIBUTOR, COIL, ECU, AND PLUG WIRES
- WATER PUMP, PULLEYS, AND BELTS
|
| |
| ALSO AVAILABLE: |
- SET UP AND FIRE ENGINE 150.00
- AFTER THAT 65.00 PER HOUR
|
|
