ATECO Dynamometer Services

FULL DAY

• OPERATOR FURNISHED
• 8 HOURS TO INSTALL, RUN ON DYNO, AND REMOVE
• ENGINE INSTALLED AND FLUID LEVELS CHECKED
• ENGINE FIRED AND STABALIZED
• BROKE-IN AND CHECKED FOR LEAKS
• GET OIL TEMP. AND VERIFY OIL PRESS. AND WATER TEMP
• SET IDLE AND VERIFY IDLE VACUUM
• CHANGE OIL, CHECK, AND CLEAN FILTER
• CHECK COMPRESSION, VALVE LASH, AND SPARK PLUGS
• WARM UP ENGINE TO DO PULLS
• DO SOME POWER PULLS TO CHECK RUNNING CONDITIONS
• CHANGE JETS, PLUGS, OR TIMING AS NEEDED
• DO MAX POWER PULLS (OPTION TO USE SHIFT POINTS OR CIRCLE TRACK DIMENSIONS TO SIMULATE ON TRACK)
• GIVEN OPTION TO TRY OTHER CARBS, SPACERS, HEADERS ETC.
• CUSTOMER GETS A SPECIAL FOLDER W/DIGITAL PICTURES OF ENGINE ON DYNO AND THE MOST ACCURATE TEST RESULTS AVAILABLE.
• ACCESSORIES REMOVED AND ENGINE TAKEN OFF DYNO

HALF DAY

• OPERATOR FURNISHED
• 4 HOURS TO INSTALL, RUN ON DYNO, AND REMOVE
• ENGINE INSTALLED AND FLUID LEVELS CHECKED
• ENGINE FIRED, STABALIZED, AND CHECKED FOR LEAKS
• GET OIL TEMP, VERIFY OIL PRESSURE, AND WATER TEMP
• SET IDLE AND VERIFY VACUUM
• WARM UP ENGINE TO DO PULLS
• DO SOME MAX POWER PULLS (WITH OPTION TO SET DYNO FOR TRACK SIMULATION)
• REMOVE ACCESSORIES AND TAKE ENGINE OFF DYNO

RECOMMENDED ITEMS

• MAIN CARBURETOR+SPARE
• CARB SPACERS
• FUEL PUMP
• OIL AND FUEL
• SPARK PLUGS AT DIFFERENT HEAT RANGES
• DISTRIBUTOR, COIL, ECU, AND PLUG WIRES
• WATER PUMP, PULLEYS, AND BELTS

ALSO AVAILABLE

• SET UP AND FIRE ENGINE $150.00
• AFTER THAT $65.00 PER HOUR