ATECO Engine and Dyno Shop

ATECO High Performance Machine Shop Services

If you don't see what you need, call us at 847-623-2737.
We can do anything, but the impossible takes a little longer.

Labor Packages

Code	Description	Price
HP0100	Bake/Blast & Mag, R&R Cam Bearings, Exch Plugs	$126.35
HP4000-D-LB	Disassemble Complete Engine	$225.00
HP4000-D-SB	Disassemble Short Block	$127.50
HP4000-GD	Deburr Block	$85.00
HP4000-M	Magnaflux Block	$63.75
HP4000-S8	Sonic Test Block	$85.00
HP4000-TO	Tap Oil Gallery Holes	$63.75
HP4060	Install Sleve (per cyl)	$106.25
HP4100-V8	Bore up to .060 V8	$97.75
HP4200-V8	Hone and Cross Hatch with CK-10	$63.75
HP4200-V8-PL	Hone and Cross Hatch with Plate with CK-10	$106.25
HP4300	Hone Lifter Bores for Clearance	$21.25
HP4300-N	Grind Clearance for Rods & Strokers	$127.50
HP4400-H	Align Hone Stock Block	$141.00
HP4410	Align Bore with Add on 4-Bolt Mains	$283.05
HP5000-L6	Mill 4 & 6 Blocks	$106.25
HP5000-V8	Correct Deck Height Up To .040	$127.50
HP5000-V8-E	Correct Deck Height Over .040	$170.00
HP5500	O-Ring Block V8's	$127.50
HP6400	Assembly to Check Deck	$127.50
HP6500	Set Ring End Gap V8's (Street & Strip)	$63.75
HP6700-A-LB	Assembly Performance Long Block & Spin Test	$510.00
HP6700-A-SB	Assembly Street & Strip Short Blocks	$225.00
HP6700-D-LB	Dress Engine for Dyno	$255.00
HP7500	Dyno Test & Evaluate Engine	$600.00

Code	Description	Price
HP2005	Grind Crankshaft With Racing Clearances	$165.00
HP2200-M	Magnaflux Crankshaft	$42.50
HP2200-S	Straighten Crankshaft	$42.50
HP2200-SP	Shot Peen Crankshaft	$42.50
HP2300-V8-D-P	Polish Crankshaft & Degrease	$63.75
HP2700	Cross Drill Mains	$102.00
HP2800	Chamfer Oil Holes	$34.00

Code	Description	Price
HP0011-2	Bake and Blast Heads and Magnaflux	$67.50
HP1100-B	Street and Strip Valve Job	$265.00
HP1100-BB	Competition Valve Job with Bowl Blend	$382.50
HP1201-CC	CC Combustion Chambers	$42.50
HP1201-CC-M	Correct CC's in Combustion Chambers and Flat Mill (8)	$212.50
HP1201-V8	Mill V8 Heads up to .020 (2)	$72.25
HP1250-V8	Mill Intake Side of Heads (2)	$85.00
HP1300-M-V8	Magnaflux Heads	$44.20
HP1400-16-H	Install Bronze Guide Liners (16)	$127.50
HP1515-16	Machine for Large Valve (16)	$127.50
HP1701-16	Install Screw Studs (16). Includes Removing Old Studs (Chevy)	$170.00
HP1800-16	Machine for P.C. Type Seals (16)	$42.50
HP1803-16	Machine for Large Springs (16)	$56.00
HP1900-P/I/E	Match Port Heads Intake and Exhaust (1" or less)	$170.00

Code	Description	Price
HP2900-C	Pressure Plate and Flywheel	$28.00
HP2900-D	Damper	$28.00
HP2900-L6-STK	4 and 6 cylinders	$170.00
HP2900-V8-EX	External Balance V8 (with Damper & Flexplate)	$246.50
HP2900-V8-STK	Most V8's (Stock Crankshaft)	$212.50
HP2930-F	Flywheel	$28.00

Code	Description	Price
HP3000-8-M	Magnaflux Rods	$42.50
HP3000-8-SP	Shot Peen Rods	$85.00
HP3100-8	Recondition 8 Rods	$106.25
HP3200-88-RS	Check and Correct Side Clearance	$42.50
HP3300-8	Pin Fit Rods	$34.00
HP3300-8-P	Pin Fit Piston	$34.00
HP3308	Full Float Rods and Drill Pin Oil Holes	$85.00
HP3320-8	R&R Bushing and Pin Fit	$85.00
HP3730-8	Glass Bead Piston Domes	$42.50
HP3740	Machine Valve Clearance (1) Intake or Exhaust	$90.10
HP3740-2	Machine Valve Clearance (2) Intake and Exhaust	$140.25
HP3800-MD	Machine Domes to Reduce Compression	$85.00

	Markham Racing
	Ralph Markham racing for the season championship with ATECO power!