| HP0100 | Bake/Blast & Mag, R&R Cam Bearings, Exch Plugs | $126.35 |
| HP4000-D-LB | Disassemble Complete Engine | $225.00 |
| HP4000-D-SB | Disassemble Short Block | $127.50 |
| HP4000-GD | Deburr Block | $85.00 |
| HP4000-M | Magnaflux Block | $63.75 |
| HP4000-S8 | Sonic Test Block | $85.00 |
| HP4000-TO | Tap Oil Gallery Holes | $63.75 |
| HP4060 | Install Sleve (per cyl) | $106.25 |
| HP4100-V8 | Bore up to .060 V8 | $97.75 |
| HP4200-V8 | Hone and Cross Hatch with CK-10 | $63.75 |
| HP4200-V8-PL | Hone and Cross Hatch with Plate with CK-10 | $106.25 |
| HP4300 | Hone Lifter Bores for Clearance | $21.25 |
| HP4300-N | Grind Clearance for Rods & Strokers | $127.50 |
| HP4400-H | Align Hone Stock Block | $141.00 |
| HP4410 | Align Bore with Add on 4-Bolt Mains | $283.05 |
| HP5000-L6 | Mill 4 & 6 Blocks | $106.25 |
| HP5000-V8 | Correct Deck Height Up To .040 | $127.50 |
| HP5000-V8-E | Correct Deck Height Over .040 | $170.00 |
| HP5500 | O-Ring Block V8's | $127.50 |
| HP6400 | Assembly to Check Deck | $127.50 |
| HP6500 | Set Ring End Gap V8's (Street & Strip) | $63.75 |
| HP6700-A-LB | Assembly Performance Long Block & Spin Test | $510.00 |
| HP6700-A-SB | Assembly Street & Strip Short Blocks | $225.00 |
| HP6700-D-LB | Dress Engine for Dyno | $255.00 |
| HP7500 | Dyno Test & Evaluate Engine | $600.00 |
| HP2005 | Grind Crankshaft With Racing Clearances | $165.00 |
| HP2200-M | Magnaflux Crankshaft | $42.50 |
| HP2200-S | Straighten Crankshaft | $42.50 |
| HP2200-SP | Shot Peen Crankshaft | $42.50 |
| HP2300-V8-D-P | Polish Crankshaft & Degrease | $63.75 |
| HP2700 | Cross Drill Mains | $102.00 |
| HP2800 | Chamfer Oil Holes | $34.00 |
| HP0011-2 | Bake and Blast Heads and Magnaflux | $67.50 |
| HP1100-B | Street and Strip Valve Job | $265.00 |
| HP1100-BB | Competition Valve Job with Bowl Blend | $382.50 |
| HP1201-CC | CC Combustion Chambers | $42.50 |
| HP1201-CC-M | Correct CC's in Combustion Chambers and Flat Mill (8) | $212.50 |
| HP1201-V8 | Mill V8 Heads up to .020 (2) | $72.25 |
| HP1250-V8 | Mill Intake Side of Heads (2) | $85.00 |
| HP1300-M-V8 | Magnaflux Heads | $44.20 |
| HP1400-16-H | Install Bronze Guide Liners (16) | $127.50 |
| HP1515-16 | Machine for Large Valve (16) | $127.50 |
| HP1701-16 | Install Screw Studs (16). Includes Removing Old Studs (Chevy) | $170.00 |
| HP1800-16 | Machine for P.C. Type Seals (16) | $42.50 |
| HP1803-16 | Machine for Large Springs (16) | $56.00 |
| HP1900-P/I/E | Match Port Heads Intake and Exhaust (1" or less) | $170.00 |
| HP2900-C | Pressure Plate and Flywheel | $28.00 |
| HP2900-D | Damper | $28.00 |
| HP2900-L6-STK | 4 and 6 cylinders | $170.00 |
| HP2900-V8-EX | External Balance V8 (with Damper & Flexplate) | $246.50 |
| HP2900-V8-STK | Most V8's (Stock Crankshaft) | $212.50 |
| HP2930-F | Flywheel | $28.00 |
| HP3000-8-M | Magnaflux Rods | $42.50 |
| HP3000-8-SP | Shot Peen Rods | $85.00 |
| HP3100-8 | Recondition 8 Rods | $106.25 |
| HP3200-88-RS | Check and Correct Side Clearance | $42.50 |
| HP3300-8 | Pin Fit Rods | $34.00 |
| HP3300-8-P | Pin Fit Piston | $34.00 |
| HP3308 | Full Float Rods and Drill Pin Oil Holes | $85.00 |
| HP3320-8 | R&R Bushing and Pin Fit | $85.00 |
| HP3730-8 | Glass Bead Piston Domes | $42.50 |
| HP3740 | Machine Valve Clearance (1) Intake or Exhaust | $90.10 |
| HP3740-2 | Machine Valve Clearance (2) Intake and Exhaust | $140.25 |
| HP3800-MD | Machine Domes to Reduce Compression | $85.00 |